Commit 180a9608 authored by Friedrich Beckmann's avatar Friedrich Beckmann Committed by Manuel Mikschl
Browse files

added demo project for static timing analysis

parent 53d3c501
# assign pin locations to a quartus project
# Pin Assignments
set_location_assignment PIN_L22 -to SW[0]
set_location_assignment PIN_L21 -to SW[1]
set_location_assignment PIN_M22 -to SW[2]
set_location_assignment PIN_V12 -to SW[3]
set_location_assignment PIN_W12 -to SW[4]
set_location_assignment PIN_U12 -to SW[5]
set_location_assignment PIN_U11 -to SW[6]
set_location_assignment PIN_M2 -to SW[7]
set_location_assignment PIN_M1 -to SW[8]
set_location_assignment PIN_R20 -to LEDR[0]
set_location_assignment PIN_R19 -to LEDR[1]
set_location_assignment PIN_U19 -to LEDR[2]
set_location_assignment PIN_Y19 -to LEDR[3]
set_location_assignment PIN_T18 -to LEDR[4]
set_location_assignment PIN_V19 -to LEDR[5]
set_location_assignment PIN_Y18 -to LEDR[6]
set_location_assignment PIN_U18 -to LEDR[7]
set_location_assignment PIN_R18 -to LEDR[8]
set_location_assignment PIN_U22 -to LEDG[0]
set_location_assignment PIN_U21 -to LEDG[1]
set_location_assignment PIN_V22 -to LEDG[2]
set_location_assignment PIN_V21 -to LEDG[3]
set_location_assignment PIN_W22 -to LEDG[4]
set_location_assignment PIN_J2 -to HEX0[0]
set_location_assignment PIN_J1 -to HEX0[1]
set_location_assignment PIN_H2 -to HEX0[2]
set_location_assignment PIN_H1 -to HEX0[3]
set_location_assignment PIN_F2 -to HEX0[4]
set_location_assignment PIN_F1 -to HEX0[5]
set_location_assignment PIN_E2 -to HEX0[6]
set_location_assignment PIN_E1 -to HEX1[0]
set_location_assignment PIN_H6 -to HEX1[1]
set_location_assignment PIN_H5 -to HEX1[2]
set_location_assignment PIN_H4 -to HEX1[3]
set_location_assignment PIN_G3 -to HEX1[4]
set_location_assignment PIN_D2 -to HEX1[5]
set_location_assignment PIN_D1 -to HEX1[6]
set_location_assignment PIN_G5 -to HEX2[0]
set_location_assignment PIN_G6 -to HEX2[1]
set_location_assignment PIN_C2 -to HEX2[2]
set_location_assignment PIN_C1 -to HEX2[3]
set_location_assignment PIN_E3 -to HEX2[4]
set_location_assignment PIN_E4 -to HEX2[5]
set_location_assignment PIN_D3 -to HEX2[6]
set_location_assignment PIN_H12 -to GPO_1[0]
set_location_assignment PIN_H13 -to GPO_1[1]
set_location_assignment PIN_L1 -to CLOCK_50
set_location_assignment PIN_H14 -to GPI_1_2
# ----------------------------------------------------------------------------
PROJECT = de1_sta
# Prototype Board FPGA family and device settings
# DE1
FAMILY = "Cyclone II"
include ../makefile
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity de1_sta is
port (
CLOCK_50 : in std_ulogic;
x_i : in unsigned(7 downto 0);
y_o : out unsigned(x_i'range)
end de1_sta;
architecture rtl of de1_sta is
signal a,b,c,d : unsigned(x_i'range);
signal sum : unsigned(x_i'range);
signal clk : std_ulogic;
clk <= CLOCK_50;
sum <= a + b + c + d;
y_o <= sum when rising_edge(clk);
a <= x_i when rising_edge(clk);
b <= a when rising_edge(clk);
c <= b when rising_edge(clk);
d <= c when rising_edge(clk);
end architecture;
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment